SF60 Web Driver User Manual

Complete Guide for Setup, Customization, and Firmware Update

1. Connection & Activation

Connect the keyboard to your computer using the included USB cable. The SF60 Web Driver supports wired connection mode only. Press Fn + Tab to automatically open the driver page.

When accessing the driver for the first time, an activation prompt will appear. Please follow the instructions to complete activation before using customization features.

Before activation, we recommend checking the keyboard appearance and testing all keys to ensure everything is functioning properly.

If the driver does not open automatically, manually visit:
https://driveshid.chilkey.cn/ 

Supported browsers: Google Chrome and Microsoft Edge.

Please click here to play the video.

2. Login

The driver does not require an account for basic usage. However, users must create and log in to an account to upload, manage, and synchronize personal configurations.

Creating an Account

When registering a new account, users must provide a username, email address, and password.

The account requirements are as follows:

• Username: 4–20 characters.
• Email: Must be a valid email address.
• Password: 6–20 characters, containing at least one letter and one number.
• Password format: Only letters and numbers are supported.
• Password confirmation: The two password entries must match.

Once registration is completed, users can log in and manage their personal configurations.

Please click here to play the video.

3. Performance Settings

Trigger Settings

Trigger Settings allows you to customize key response behavior. You can select all keys or specific keys (such as WASD) and adjust actuation distance, Rapid Trigger (RT), and travel testing settings.

Dead Zone Settings

Select the keys you want to adjust and configure the dead zone settings. Factory default settings are recommended for most users. Incorrect adjustments may affect key stability and responsiveness.

Switch Settings

Select all switches, then choose the corresponding switch type to apply the configuration.

Calibration Settings

Click Start Calibration, then press each selected key fully. When the key indicators turn green, calibration is complete. 

Please click here to play the video.

4. RGB Lighting

1. Select the lighting zone (main keyboard lighting or decorative lighting).
2. Choose your preferred lighting effect.
3. Adjust brightness and animation speed.
4. Select preset colors or create custom colors.

For custom colors, select a color first, then click keys in the keyboard layout area to apply it. Right-click a key to remove its color. Right-click and drag to clear multiple custom colors.

Please click here to play the video.

5. Custom Key Remapping

On the Custom page, select the key you want to modify from the keyboard layout. Drag the desired function key from the bottom area to the selected key position to complete remapping.

Use the reset option to restore the default key layout when needed.

Please click here to play the video.

6. Advanced Keys

In the SOCD Priority section, select the key you want to bind and the trigger key above. Set the delay to 0 ms and select Hold Override mode, then click Confirm.

Please click here to play the video.

7. Macro Setup

Click Start Recording and press the required keys to record the macro. Then drag the created macro (such as M0) to the desired key position.

Please click here to play the video.

8. Firmware Update

Click Online Update, then click Start Update. Wait until the progress bar completes. A notification will appear when the update is finished.

Firmware Update Notes:
- Keep the keyboard connected via USB during the update.
- Do not disconnect the cable until the update is complete.
- The keyboard may restart automatically after updating.

Please click here to play the video.

9. Configuration Library

The driver provides configuration files from professional players. You can apply these configurations and sync all settings with one click.

10. Troubleshooting

Driver page does not open:
- Make sure the keyboard is connected through USB.
- Try Google Chrome or Microsoft Edge.
- Clear the browser cache and try again.
- Open the driver page in incognito/private browsing mode.
- Press Fn + Tab again.

Firmware update failed:
- Restart the driver and try again.
- Reconnect the keyboard.
- Try another USB port.